UBI ScanPlus 1800, Installation Manual

Page: 20 / 80

4. Enter the interface number for your host system
SP/XX/IG/12/E/980228 4-2
Which interface number?
1. Look on the next pages to see if there is a predefined interface number
for your host system hardware configuration:
Keyboard wedge................................. 4-3
RS-232............................................... 4-7
Laser emulation.................................. 4-8
Wand emulation ................................. 4-8
IBM 46xx cash registers...................... 4-9
OCIA cash registers ........................... 4-9
2. If you find a number for your hardware configuration, use your
ScanPlus to read the corresponding bar code.
If you do not find an interface number for your host system configuration . . .
If your interface number is not among the predefined interface numbers provided below,
you must compose the number yourself.
If you do not know which number to enter, contact your UBI representative.
1. Use your ScanPlus to read the Compose Interface Number bar code:
Compose Interface Number
2. Read each digit of your interface number using the number codes on
the back cover of this Installation Guide and scan the End Selection bar
code—also on the back cover—to finish.
Example To enter the number 102:
1. Scan Compose Interface Number.
2. Scan 1, then 0, then 2.
3. Scan End Selection.