UBI ScanPlus 1800, Installation Manual

Page: 17 / 80

SP/XX/IG/12/E/980228 3-1
3
Switch on the host system
What the beeps and LED flashes mean
The ScanPlus should emit two beeps to indicate that the power-up
sequence has been completed.
The green indicator LED will then indicate the interface type selected
for the ScanPlus.
green LED indication selected interface type P/N identification
continuous LED null interface factory default setting
(all models)
no LED laser emulation x - x x x x x 0 - x x - x x
1 flash wand emulation x - x x x x x 1 - x x - x x
2 flashes RS-232 C x - x x x x x 2 - x x - x x
3 flashes IBM 46xx cash registers x - x x x x x 3 - x x - x x
4 flashes RS-232 TTL x - x x x x x 4 - x x - x x
5 flashes OCIA cash registers x - x x x x x 5 - x x - x x
7 flashes keyboard wedge x - x x x x x 7 - x x - x x
The Part Number (P/N) indicates the hardware interface setup for your ScanPlus model.
If you have an energy saver pushbutton model and the pushbutton is activated, the
power-up beeps and power-up LED will not operate.