UBI EasyCoder 501 – User's Manual
7
PAPER LOAD – TEAR OFF, cont'd.
5b
6
8
9a
7
In case of an EasyCoder 501 E or 501 SA, rotate the label slack absorber 180˚ clockwise to open position (snap-lock).
Then thread the paper underneath the slack absorber and under the guide plate of the label stop sensor.
Push the paper inwards as far as it will go.
This diagram shows the path of the paper web.
Turn the printhead lift knob to “Print” position.
Load
In case of an EasyCoder 501, adjust the green guide ring
so the paper is guided with a minimum of play.
