UBI EasyCoder 501 – User's Manual
13
PAPER LOAD – PEEL OFF, cont'd.
Push the label web inwards as far as it will go.
6a
6b
8
9
7
In case of an EasyCoder 501 E or 501 SA, rotate the label slack absorber 180˚ clockwise to open position (snap-lock).
Then thread the label web underneath the slack absorber and under the guide plate of the label stop sensor.
This diagram shows the path of the label web and the
backing paper.
Pull out approx. 40 cm (15") of label web and remove the
labels from the backing paper.
In case of an EasyCoder 501, thread the paper under-
neath the guide shaft behind the print mechanism.
Load
40 cm/15"
