UBI EasyCoder 501 SA, User Manual

Page: 20 / 28

UBI EasyCoder 501 – User's Manual
20
TEAR-OFF
Load
Print
!
Load
Print
RIBBON LOAD
Pull out the used-up ribbon and the empty ribbon core.
1
3
5 6
4
2
Open the front and right-hand doors.
Turn the printhead lift knob to “Load” position.
Press the ribbon roll onto the ribbon supply spool (1)
and thread the ribbon under the upper part of the print
unit. Pull out approx. 20 cm (8") of ribbon (2).
Be careful to thread the ribbon above the handle of the
label stop sensor! The ribbon must be fitted so the spools
rotate counter-clockwise, as illustrated above.
Unpack a roll of original UBI transfer ribbon.
The use of any thermal transfer ribbon, other than those
supplied by UBI, will invalidate the printhead warranty.
F5
F4
F3
F2
F1
C
0
.
Enter
3
2
1
Feed
6
5
4
SetUp
9
8
7
Pause
Print
Power
Ready
Error
IMP
The use of a
The quali
for the qu
paper w
only U
TEAR-OFF
1.
Load
Print
2.
Load
Print
!