UBI EasyCoder 501 – User's Manual
16
In case of label roll with a 76.2 mm (3 inches) core, first
fit the two adapters on the paper supply spool.
76 mm
(3")
PAPER LOAD – REWIND, cont'd.
6b
7b
8
9
7a
In case of an EasyCoder 501, thread the paper under-
neath the guide shaft behind the print mechanism.
In case of an EasyCoder 501 E or 501 SA, rotate the label slack absorber 180˚ clockwise to open position (snap-lock).
Then thread the paper underneath the slack absorber and under the guide plate of the label stop sensor.
Push the paper inwards as far as it will go.
This diagram shows the path of the label web.
