UBI EasyCoder 501 SA, User Manual

Page: 14 / 28

UBI EasyCoder 501 – User's Manual
14
PAPER LOAD – PEEL OFF, cont'd.
Turn the printhead lift knob to “Print” position.
10
12
13b 14
13a
11
Secure the backing paper with the clip (1) and wind it up
on the take-up spool so the web becomes tight (2).
In case of an EasyCoder 501 E or 501 SA, release the
slack absorber (1). Adjust the green guide ring so the
paper is guided with a minimum of play (2).
Thread the backing paper around the print roller and
dispenser edge and rearwards under the print unit.
1.
2.
Load
Print
Load
Print
In case of an EasyCoder 501, adjust the green guide ring
so the paper is guided with a minimum of play.
2.
1.
Close the front and side doors. Feed out two blank labels
by pressing the <Print> key twice.
F5
F4
F3
F2
F1
C
0
.
Enter
3
2
1
Feed
6
5
4
Setup
9
8
7
Pause
Print
Power
Ready Error
EasyCoder 501 E
2x
# 2
# 1