UBI EasyCoder 501 – User's Manual
11
PAPER LOAD – CUT OFF, cont'd.
10a
10b
Turn on the power using the switch on the rear plate.
Thread the paper through the cutter between the two
guide plates.
Close the cutter unit while pulling at the end of the paper.
Close the right-hand door.
Feed out and cut two blank copies by pressing the
<Print> key twice.
Load
# 2
# 1
2x
11
12
13
14
In case of an EasyCoder 501 E or 501 SA, release the
slack absorber (1). Adjust the green guide ring so the
paper is guided with a minimum of play (2).
2.
1.
In case of an EasyCoder 501, adjust the green guide ring
so the paper is guided with a minimum of play.
