Product information
Page 13
printed: 06/2020 Subject to change!
:FFUserManual.docx
3.3.8 Name Plate
The installation and operation manual is made for the Ubert Wall of Flame Rotisserie of the model
series FF with the categories of natural gas and LPG mentioned under point 3.3.8. The units corre-
spond to kind of construction "A".
The type plate is fixed on the front side of the unit and bears the following indications:
- Serial number, type
- Order number kind of construction acc. to DIN-EN 203 A B
- Applicable for natural gas H/L and LPG
- Category
- Adjusted for natural gas H 20 mbar
- for natural gas L 20 mbar
- for LPG mbar
- Heat Load kW
- Adjustment pressure / pressure control [mbar]
- Consumption: natural gas H m³/h
- natural gas L [m³/h]
- LPG [kg/h]
- Power [kW]
- Electrical connection.: V N Hz
- 0085
Differing from a.m. indications the type plate will be executed suitable for the following countries:
Netherlands for natural gas L:
connection pressure 25 mbar
France and Belgium for natural gas E+:
connection pressure 20 resp.. 25 mbar.
3.3.9 Construction of the Wall of Flame Rotisserie und equipment
The unit is a Wall of Flame Rotisserie with atmospheric main burners, pilot flame burner and chicken
spits which are driven by a motor chain gear. The gas connection is at the lower right side of the
unit. The temperature control is made by multiple adjustment valves with thermoelectrical ignition
safety device (fully ignition safe gas armatures) The operation temperature can be adjusted infinitely
variable from the minimum adjustment to the maximum adjustment. Each burner is ignited separately
by a piezo igniter. Motor and illumination are switched on or off by turning cam switches.
Summary of Contents for FF Series
Page 1: ...User Manual Wall of Flame FF Series...
Page 2: ......
