Page 20
Maintenance
printed: 06/2020 Subject to change!
:FFUserManual.docx
6 Maintenance
Following we give you advices for maintenance, possible trouble shooting and for service cases of
your unit.
6.1 Cleaning and care
6.1.1 Safety advices
•
Before you start any cleaning or maintenance work close the main gas supply and
unplug the unit.
•
Never use flammable liquids, nor use any sharp or metallic utensils for cleaning your
appliance. Do not use high pressure water or steam appliances! More detailed infor-
mation to follow below.
•
Wear acidproof gloves while cleaning the parts to prevent skin irritations.
6.1.2 General Recommendations
•
The unit has to be cleaned daily.
•
Only use non-poisonous cleaners (neutral or alkaline detergents) which are harm-
less in connection with food, even if there are plain and persistent residues.
•
After cleaning with special cleaners, you have to wash all parts with clear water and
dry them afterwards so that there are no residues of the cleaner on these parts.
•
It is absolutely necessary to watch out for some fundamental things to keep this
long living high-grade-steel-machine working:
- always keep the high-grade-steel surface clean.
- watch out that there is always enough fresh air on the surface
- never contact the surface with rusty material
•
never use bleaching or chlorine cleaners.
•
Observe that no residues or waste reaches the burner or thermo element during op-
eration or cleaning, as this can cause damages to the proper control
•
of the burner.
6.1.3 Special Recommendations
Control the grease lubrication of the bearings and the chain at least quarterly, more
often if necessary. If the bearings and the chain are not greasy enough, grease them
to ensure a reliable working of the bearing. For lubrication use heat-resistant grease
only. Disregarding follows defect bearings and breakdown of the spit rotation! (Heat-
resistant grease (part no. 412221) and grease guns (part no. 550408) are available at
Ubert.)
6.1.4 Detergents
To make the cleaning fast and easy we have integrated some cleaners in our pro-
gram:
•
Stainless steel-cleaner
You have to spray this from a distance of app. 25 cm on the surface and wipe it off
with a dry-cleaning rag. If you want to clean only small parts you have to spray it
directly on the cleaning rag and wipe it off this way. With this method it is possible to
clean the Rotisserie Wall of Flame easily and without stripes.
Summary of Contents for FF Series
Page 1: ...User Manual Wall of Flame FF Series...
Page 2: ......
