9
24
The device management menu offers the following options:
update time—used to synchronize a new time if time settings in the uAttend
account change.
device Id—used to display the Device ID for the CB1000.
upload logo—used to import a logo from a uAttend account to display on the
CB1000.
date Format—used to change the way that dates are displayed on the
CB1000.
reverify time—used to select how often the CB1000 will update its time
setting.
Sounds—used to turn the CB1000 sounds on and off.
time Format—used to change the way that time is displayed on the CB1000
The communications menu offers the following options:
Ip Address—displays the current IP address and allows a user to set a new IP
address.
Subnet mask—displays the current Subnet Mask and allows a user to set a
new Subnet Mask.
defgateway—displays the current Gateway and allows a user to set a new
Gateway.
dhcp—used to turn DHCP on and off.
dnS Ip Addr—displays the current DNS IP address.
The System management menu offers the following options:
reset—resets the CB1000 to the factory default settings.
help—displays the Customer Support telephone number.
mAc Address—displays the CB1000’s MAC address.
update Firmware—updates the firmware to the most updated version.
Firmware Version—displays the firmware version.
5. In the device Id field, enter the device Id assigned to the Bn2500.
You can find the Device ID on a sticker on the back of the timeclock. If you
cannot locate this sticker, you can also find the Device ID in the timeclock. To do
this, press the Menu key and enter the password (default password is 53178).
Scroll to Device Management and press OK, then scroll to Device ID and press OK.
Be sure to enter the complete Device ID. An example of a Device ID is
BN2500-12345678.
6. In the name/location field, enter the name for the timeclock.
This field is used to easily identify the timeclock.
7. click Add.
Next, you will connect the BN2500 to the Internet—via a WIFI router or via a
LAN cable to a router. Both sets of instructions are listed below.
6.2.1 connecting via WIFI router
Follow these steps on your BN2500 to link the BN2500 to your uAttend account via
a WIFI router:
The timeclock should be turned on, with the display illuminated. The timeclock will
display the prompt “Press 1 to connect to your WIFI router. Press 2 to connect via
LAN.”
1. press 1 to initialize the WIFI module.
The timeclock will display the message “WIFI Network is Not Available! Press
OK to view a list of available WIFI Networks!”
2. press oK.
A list of all WIFI networks that the timeclock detects will appear.
3. using the down arrow key, scroll to your preferred network and press oK.
If your WIFI network requires a password, the timeclock will prompt you to input
the password.
4. enter the password and press oK.
To enter alpha characters, press the # key and follow the onscreen directions.
The timeclock will connect to your WIFI network using the credentials you
supplied. After the WIFI module initializes, you will see the message “DHCP
Configuring.”
