TZ Centurion 7130CF Product Manual Download Page 26

Page: 26 / 35

page 23 of 11

A TZ Business |

ixp.tz.net

, TZ Centurion

™

, TZ SlideHandle

™

, TZ Radial

™

, TZ SMArt

™

and TZ Sensors

™

are trademarks of TZ Limited. Patents Pending.

TZ Centurion

™

Bridge

TZ Centurion

™

Bridge Model 7130CF Series

8.4.2. Download Alarm Logs

Clicking this button will download a text file containing all of the details of whenever an alarm was activated or deactivated.

Clicking this button will clear the internal log of all of the non-alarm events (e.g. doors being opened, cards being swiped, users

being added to the system, etc.) from non-volatile memory.

8.4.3. Download Event Logs

Clicking this button will download a text file containing the details of all the non-alarm events. (e.g., doors being opened, cards

being swiped, users being added to the system, etc.)

8.5. Other Buttons under the System tab

The buttons for Re-booting the System, updating the TZ Centurion Bridge firmware, or clearing either the different logs are all

found on the Settings sub tab of the System Tab as shown in Figure 18 below:

Figure 18: The SD Backup and Recover Functions, Re-boot System, Firmware Update, Clear Event Logs, Clear Alarm Logs, and

Clear Sensor logs buttons are all found on the Settings sub tab of the System tab.

Summary of Contents for Centurion 7130CF




































Search results

Summary of Contents for Centurion 7130CF

Reviews:

Related manuals for Centurion 7130CF

Brands by name

Popular brands

TZ Centurion 7130CF, Product Manual

Search results

Summary of Contents for Centurion 7130CF

Reviews:

Related manuals for Centurion 7130CF

Brands by name

Popular brands