TZ Centurion 7130CF Product Manual Download Page 2

Page: 2 / 35

page i

A TZ Business |

ixp.tz.net

, TZ Centurion

™

, TZ SlideHandle

™

, TZ Radial

™

, TZ SMArt

™

and TZ Sensors

™

are trademarks of TZ Limited. Patents Pending.

TZ Centurion

™

Bridge

TZ Centurion

™

Bridge Model 7130CF Series

About TZ

Telezygology, Inc. (TZ) is a wholly owned subsidiary

of publicly listed intellectual property and technology

development company,TZ Limited with design and

engineering operations throughout the US and Europe

and Australia.

TZ is a leader in the integration of intelligence and software

control into everyday objects to enable new levels of

functionality. Supported by a full product development

capability, TZ technology is a platform on which many

different solutions can be created by third parties seeking

to integrate remote controlled intelligent locking and

sensory devices to add functionality to their products.

TZ solutions fuse software controlled remote locking and

fastening, environmental sensing, real time analysis and

measurement to provide adopters with compelling benefits

for their products and businesses.

Disclaimer

This document is intended to provide basic technical

information related to the TZ Centurion

™

Bridge

model 7130CF.

This document is not meant to be an exhaustive statement of

all relevant data. By using this document, however, you agree

to accept and comply with the terms, conditions, notices and

disclaimers contained in this document.

While TZ has used all due care and skill to ensure that the

information contained in this document is accurate, correct

and current at the time of publication, it does not warrant

or represent that the information is free from errors or

omissions, and does not accept responsibility for any

defect in the information.

Use of Information Contained

in This Document

The correct functions of the TZ Centurion Bridge will require

consideration of installation and system integration issues

such as networking for power and data, and subsequent

programming for functionality.

The TZ Radial 4100 Series system described has not

been tested or qualified for a specific application other

than for compliance to the specification outlined. Specific

qualification testing may be required for fit-for-purpose

application design.

Caution

Changes or modifications not expressly approved by TZ

could void the user’s authority to operate the equipment

(FCC Code of Federal Regulations Title 47 Part 15.21).

Summary of Contents for Centurion 7130CF




































Search results

Summary of Contents for Centurion 7130CF

Reviews:

Related manuals for Centurion 7130CF

Brands by name

Popular brands

TZ Centurion 7130CF, Product Manual

Search results

Summary of Contents for Centurion 7130CF

Reviews:

Related manuals for Centurion 7130CF

Brands by name

Popular brands