15
4.2.36 Fix the round port cable fixation bracket (using a Phillips
screwdriver) on the bottom bracket.
4.2.f
Drop cable preparation (16 port base)
4.2.37 Remove the cable jacket for 2.2m.
4.2.34 Put the fibers in the breakout through the center (put the tube
stop at cable jacket side) and slide the breakout on the bracket and fix
it with the screw.
4.2.35 Insert the ST (spiral tube) over the fibers into the breakout till
the tube stop.
0pen the round port and place the heatshrink as discribed in loose tube
preparation.
4.2.38 If ports 3-4-5-6-7-8-9-10 are used, cut strength member on
75mm length.
If ports 11-12-13-14-15-16-17-18 are used cut strength member on
90mm length and cut the central core at 30 mm from the jacket.
4.2.39 Put the Spiral tube on the cable
