8
4.1.28 Fix the strength member connector in the closure.
4.1.27 If ports 3-4-5-6-7-8-9-10 are used, cut strength member at 75
mm length. If ports 11-12-13-14-15-16-17 and 18 are used, cut
strength member at 90mm length.
4.1.25 Push the loose tubes in the port and fix the strength member in
the strength member connector. Be sure that all loose tubes are routed
without crossing around the strength member.
4.1f
Drop cable preparation (16 port base)
4.1.26 Remove the cable jacket for 2.2m.
4.1.29 Fix the cable in it.
4.1.30 Install the heat shrink.
