3
2.3
Elements possibly needed from the FIST installation kit
Product Name
UOM
QTY/UOM
Product description
FISTV-E7185-3010
1 RL
50 m
Cut wire to open the FIST-GCO ports
FISTV-E7100-1005
1 PK
10x100g
Silicagel for inside the closure, to be replaced after each re-entry
FISTV-SPLI-COL
1 PK
30 sets
Split identifications collet (2-sizes) till 3.5mm
2.4
Tools
•
FIST-LCIT
Looped tube insertion tool for oval outlet
To insert loose tubes in oval port
•
FACC-TUBE-CUTTER-01
Tube cutter
To cut spiral tubing
•
FACC-TUBE-STRIPPER-02
Tube stripper
To strip loose tubes
•
FACC-AXIAL-STRIPPER-01
Tube splitter
To split buffer tubes 2.0-3.1mm
•
FACC-HEAT-GUN-220V
H Heatgun tip
To shrink cable seals
•
FIST-WORK-STAND
To hold the closure in a vertical position during installation
•
FIST-WORK-STAND-H
Hinging workstand
To hold the closure in any position during installation
3.1.1
The FIST-GCO will be mounted temporary on the work-stand.
The work-stand is wrap-around, so that the FIST-GCO installed with
cables can be taken away from it.
Fix the FIST-GCO base onto the workstand with the four split-pen.
3
Installation
3.1
Installation of workstand
2.5
Cable preparation table
Window cut
drop cable
Loose Tube
BC6 or 16
3.5 m
2.2 m
BD6 or 16
3.7 m
2.2 m
BE6 or 16
3.9 m
2.2 m
Twisted C.Core
BC6 or 16
5.3 m
2.2 m
(Use Basket)
BD6 or 16
5.9 m
2.2 m
BE6 or 16
6.1 m
2.2 m
Untwisted C.Core
BC6 or 16
3.5 m
2.2 m
BD6 or 16
3.7 m
2.2 m
BE6 or 16
3.9 m
2.2m
3.1.2
The hingable work stand can be used. It is recommended
when he 16 port base is applied.
