Tweco Spray Master Series, Safety And Operating Instructions Manual, Page: 25 / 36

SAFETY AND OPERATING INSTRUCTIONS
19 89200009
8. Insert the replacement connector into the inner
core tube of the Cablehoz. It’s recommended
to use a small amount of lubricant to help
the connector to slide into the tube. The core
tube should bottom out against the shoulder,
approximately 15/16” (23.8mm) onto the
connector.
9. Push the copper strands underneath the sleeve. It’s recommended that a 1/8” glass filament tape be
wrapped around the exposed copper to keep the copper strands together.
10. Begin to turn the pressure nut counter-clockwise
which will force the copper strands & sleeve
against the machined taper on the connector.
11. Torque the pressure nut to 250 inch pounds (+/-50 inch pounds).
12. Connect lead wires accordingly.
13. Re-assemble the front end back into the handle halves.