TWAC Protectant, Installation Manual

Page: 49 / 182

P a g e | 47
TWAC Installation Manual Ver: 0118 CodeMark™ CMA-CM40036
RETAINING WALL SHEETING
Before commencing work, determine from the builder if the wall is to have direct stick
plaster board applied or if the wall is to be battened or framed prior to the application of
plaster board.
In the case of direct stick plaster board, the wall will need to be cleaned prior to being
fully coated with the ADSOL Adhesive before applying
Protectant
™ Termite Barrier. This
will ensure the plaster board will hold to the termite protection.
In the case of battened or framed walls Protectant
™ Termite Barrier may be applied
using beads of ADULETH Termiticide to adhere to the wall and to the 50mm overlap.
The builder must indicate frame fixing points and additional ADULETH Termiticide must
be applied to these points to isolate the frame fixings.
Protection of retaining walls is preferably done on the inside of walls using Protectant
™
Termite Barrier. ADSOL ADHESIVE is painted onto the wall before application giving a
firmly fixed finish, which will allow for direct stick of plaster board.