TWAC Protectant, Installation Manual

Page: 159 / 182

JOB SAFETY ANALYSIS WORKSHEET – ACTION PLAN
INSTALLER /SUB CONTRACTOR
JOB STEPS
POTENTIAL
HAZARDS/
INJURIES
CONTROL
MEASURES RESPONSIBILITY
IMPLEMENT
ATION
Prior to
commencing any
work all installer/
contractors
must possess
the relevant
safety induction
card for that state
Not meeting legal
requirements will
result in
expulsion from
the site and a
possible fine for
both the installer
and the employer
Ensure all state
requirements
are understood
Employer, regional/area
managers and licensees
Prior to
commencing
work for The
White Ant Co
Builder/site
specific induction
requirements
must be met
Expulsion from
the site and/or a
lack of
awareness of site
specific hazards
Be aware of
builder specific
requirements
prior to
commencing
work
Regional/area
managers, licensees
and supervisors
Prior to
commencing
work on the
site
Site observation
and planning
Work areas to be
checked for
hazards – slip,
trip, fall,
projections, noise
or hazards
created by other
trades, is site
access suitable?
If hazards can
be safely and
easily removed,
this
Can be done
while the site
safety audit is
carried out.
Should any
hazard be of
high risk – no
work is to be
carried out prior
to contacting a
supervisor.
Installer/supervisor Prior to
commencing
work on the
site
Other trades on
site - trades
working overhead
Serious injury Overhead work
in progress ie
working either
sheet or tile
Installer No access to
site
ACP Hebel Panel™ installation manual, V.5, May. 2018