Tuttnauer TIVA8-MD, Instructions For Use Manual

Page: 12 / 60

12
Operative Instructions
Each package, on the outside, shows the machine
handling instructions in brief.
During storage or handling the contents are not sterile.
Upon delivery, check that the washer disinfector is
intact and that the material indicated in the delivery
document is actually present. In case of damage
or inaccuracies in the delivery, immediately notify
the manufacturer of the extent of the damage or
inconsistencies found.
Should the need arise for transfers, the machine can
be easily loaded on suitable equipment and on the
available lifting equipment.
b
HAZARD! The loading/unloading operations
can be very dangerous if not carried out with
the utmost care. Therefore, before starting
loading/unloading, move unauthorised
persons away; clear and delimit the area
where the operation takes place, and check
the integrity and suitability of the lifting and
transportation equipment available.
Also make sure that the area of operation is clear and
that there is sufficient “escape space”, that is, a free
and safe area, in which to move quickly in the event
that the load falls. Before loading, check that there is
sufficient space on the surface of the transport vehicle
to accommodate the machine to be transferred.
a
WARNING! After loading the machine, secure
it firmly to the surface on which it rests with
taut ropes to block any possible movement.
After carrying out the transport and before releasing
the machine from all constraints, check that the status
and position cannot constitute danger.
Therefore, remove the ropes and unload using the
same equipment and methods used for loading.
Fig. 5.1
Fig. 5.2
Fig. 5.3
- Handle the packaged machine only with forklift truck
or pallet trucks with forks (Fig. 5.1).
- Remove the “hat” container, extracting it from the
top (Fig. 5.2).