Tuttnauer TIVA8-MD, Instructions For Use Manual

Page: 11 / 60

11
Operative Instructions
understood the information in this manual, as well as
by unskilled personnel who are not in good mental
and physical health.
• The machine must not be operated with the guards
removed or partly damaged.
• Use the washer disinfector only for the operations
described in this manual.
• Do not damage or change the power cable or plug.
• Never start the machine if the cable or plug are
damaged.
• Do not pull the power cable to unplug it. Always act
on the plug.
• Use detergents and additives specific for
manufacturer-approved washer disinfectors.
Always observe the manufacturer’s instructions. If,
despite this, the product has negative effects on the
instruments or machine, the responsibility will be of
the manufacturer of the cleaning liquids.
• Only introduce instruments that can be treated
with automatic cleaning and disinfection process
(see manufacturer’s instructions). It is particularly
important to follow the manufacturer’s instructions
when inserting new instruments that are used for the
first time.
• If additional accessories are used to load the
instruments, especially hollow ones, the instructions
contained in the manufacturer’s instruction manual
must be observed.
• Take care not to injure yourself by arranging sharp or
pointed objects vertically. Try to arrange them in such
a way as to prevent anyone from injuring themselves.
• Handle the chemical products with care. Chemicals
for cleaning, neutralizing and rinsing contain irritants
and caustic substances.
• The water in the chamber is not drinkable.
• Do not lean on the door and do not use it as a step.
• The machine during its work cycle could reach a
temperature of 203°F (95°C); be very careful: there
may be a risk of scalding.
• Do not change, for any reason, the characteristics of
the appliance, its installation specifications and the
parameters set.
• At the end of loading and unloading the instruments
to be used, always close the door in order to avoid
possible unpleasant smells coming from the drain.
• In case of fire, to extinguish the flames intervene with
a powder fire extinguisher, DO NOT USE WATER.
• Do not wash the machine with direct or pressure
water jets, or corrosive substances.
• Do not use the machine to wash objects and/or
containers that, because of their shape or material,
are not compatible with the indications given by the
manufacturer. For objects to be washed, please follow
the instructions explicitly indicated in this manual.
• In case of long outage periods of the machine, please
cut the power supply off and close the water taps.
• Do not try to open the chamber door during
operation: the appliance is equipped with a special
safety lock system to prevent the door from being
opened.
d
HAZARD! Pay attention where indicated, for a
potential danger of hot surfaces highlighted
on the machine with this pictogram.
c
HAZARD! Pay the utmost attention where
indicated, for a potential electrical hazard
highlighted on the machine with this
pictogram.
3.1.4 Maintenance service personnel obligations
• Periodically check the integrity of the machine as a
whole and the protection devices.
• Respect the laws in force in the country of use of the
machine, in relation to the use and disposal of the
products used for cleaning and maintenance. Dispose
of any special waste through appropriate companies
authorised for this purpose, with issue of a receipt of
the successful disposal.
• The assembly of parts of other brands or any changes
(in addition to voiding the warranty), can vary the
machine characteristics and, therefore, compromise
its operational safety.
• If the protective casings are removed, make sure
that they are correctly restored before reusing the
machine.
• At the end of the maintenance and repair operations,
before restarting the machine, make sure that the
work is completed, the safety devices reactivated and
the guards reassembled.
• It is strictly forbidden to remove or tamper with the
safety devices.
• The machine maintenance must only be performed
with the power supply off, by qualified personnel and
following the instructions in this manual.
4 Handling
Usually the packaged and palletised machine is
transported to the retailer/dealer who, by means of
its personnel and suitable means, in compliance with
current regulations, will itself make the delivery to the
end user, ensuring transport and unloading operations
depending on the type of transport vehicle.