Tuttnauer TIVA2 TD Instructions For Use Manual Download Page 38

Page: 38 / 56

English

7.8 Password reset

7.8.1 User login data lost

Contact your administrator.

7.8.2 Admin login data lost

In case of admin login data lost, type a random user

and password, then, click on the gear icon (1 Fig. 23.7).

Fig. 23.7

Click "Yes" (2 Fig. 23.7), a new window will appear

showing the Reset ID (1 Fig.23.8): without closing the

screen, contact the customer care to retrieve the reset

code.

Fig. 23.8

At the end of the process, the User and Admin

passwords will be resetted to the presettings (See

chapter 7.2).

8 Maintenance
8.1 General information

Maintenance is a set of periodic and predefined

operations aimed at maintaining the machine

functionality in all its aspects as a result of intrinsic

wear and use.
The routine maintenance operations are described

below. It should be remembered that the lower

operating cost and a long life of the machine depend

on the continuous observance of what is reported in

this manual.

For special maintenance operations,

not included in this manual, contact the

manufacturer.

The

thermodisinfector

maintenance

operations must be carried out with the

machine completely switched off.

If the machine is not used for more than

24 hours it is necessary to run a standard

cleaning program, without any instruments

inside.

The operator engaged in this type of intervention must

wear PPE (Personal Protective Equipment) and must be

sure that no other unauthorised person is present in the

operating area of the machine. Before maintenance,

start a program to disinfect the washing tank.

Maintenance request

After a certain time or a certain number of operating

hours, the display shows «MAINTENANCE». This signal

has no influence on the machine operation.

8.1.1 Routine maintenance

Routine maintenance includes all those jobs needed

to keep the machine clean and functioning. These jobs

must be carried out regularly or when necessary and

the user is responsible for verifying their regularity.

Daily

- Regularly check the filling status of containers before

starting the program.

- Clean the tank.

- Clean the wash tank filters.

- Clean the external panels with a damp cloth. Use

only neutral pH detergents. Do not use aggressive

products, solvents and/or diluents.

- Clean the control panel with a damp cloth and

washing up liquid. Do not use aggressive products,

solvents and/or diluents.

Summary of Contents for TIVA2 TD

























































Search results

Summary of Contents for TIVA2 TD

Reviews:

Related manuals for TIVA2 TD

Brands by name

Popular brands

Tuttnauer TIVA2 TD, Instructions For Use Manual

Search results

Summary of Contents for TIVA2 TD

Reviews:

Related manuals for TIVA2 TD

Brands by name

Popular brands