28
English
6.6 Display
The LCD display shows the status of the machine.
The images show the various phases and the current
operation. For example, if the machine is loading
water, the display will show the image of the tap, of
the water flow meter and of the water being loaded:
if water is purified droplets will be light blue, if water
is cold droplets will be blue and if water is hot they will
be red. The temperatures are set in degrees Celsius or
Fahrenheit. The images are animated, to show how the
current operation evolves.
Description of the display (Fig. 17):
1) The number of the running program is displayed
(e.g. P02 = program 2);
2) It displays the phase the machine is running. If the
machine is going to run a wash cycle it will display
the writing «Washing». When the machine displays
an alarm that space background turns red and the
message shows the number of the alarm and a brief
description;
3) The A0 value is displayed during disinfection;
4) Several animated images showing the current
status of the machine are displayed;
5) The elapsed phase time from the moment the
temperature set for the phase (see 12) has been
reached is displayed;
6) Bar indicating the progress of the program; if the
program is ending, the bar will be almost entirely
green;
7) The temperature measured by the PT1000 probe,
placed after the air heater, is displayed to indicate
the temperature of the air entering the chamber;
8) It displays the temperature measured by the
PT1000 probe placed in the tank. This is a control
probe;
9) It is the display of the temperature measured by
the PT1000 probe placed in the tank. This is a work
probe. The temperature detectable by the two
probes (control and work) must not differ from each
other by more than 2°C;
10) Time for which the device should maintain the set
temperature (see 12);
11) Phase of the program;
12) Temperature set for the current phase;
13) Date and time is displayed with the machine in
stand-by.
11
1
4
2
6
13
10
5
12
3
7
9
8
Fig. 17
6.6.1 Messages on the display
During washing, several messages may be displayed:
- Product 1 liquid reserve (meaning that the liquid
inside the product 1 tank is finished and must be
replaced);
- Product 2 liquid reserve (meaning that the liquid
inside the product 2 tank is finished and must be
replaced);
- Product 3 liquid reserve (meaning that the liquid
inside the product 3 tank is finished and must be
replaced).
These alerts are alternated with the description of the
current phase.
When the cycle has finished the following message
appears: «Program ended».
If the program is interrupted for one of the following
reasons:
- when the Reset button is pressed,
- because of an alarm,
- power supply failure,
the display will show the message «Program interrupted
no disinfection» (the words «no disinfection» only
appear if the running program has not yet completed
it).
The central part of the display also shows the message:
«In 10 seconds the program will resume its operation
or press and hold the reset button for 10 seconds to
definitively stop it».
If the RESET button is pressed for 10 seconds, the
program stops.
Ö
If the RESET button is not pressed, after 10
seconds the machine resumes the program
previously interrupted.
