94
20. Gauge Mode
In Gauge mode, the unit does not calculate non-decompression
dive time or decompression dive time, but only displays water
depth and diving time information etc. as a simple gauge.
When you select Gauge mode and dive to a depth of 1.6m or more
for 3 minutes or more, the unit is fixed to Gauge mode for 48 hours
after the dive ends and you cannot switch to Dive mode (computer
function) or Free diving mode.
Since N
2
Indicator (Pressure Gas in Tissue), O
2
indicator
(Oxygen Limited Indicator), surface interval time and
Desaturation time are not calculated in Gauge mode, general
users must not use this mode
Attention
Setting Of Gauge Mode
1) In Time mode or Surface mode, press
P
once, [PLAN] appears
on the screen, and after about 1 second the unit switches to
Plan mode.
2) Press and hold
A
for about 2 seconds.
After [SET] [Hold] blinks, release your finger when you see
[GAS1] [21 ~ 100%].
3) Press and hold
A
for about 2 seconds again.
After [SET] [Hold] blinks, release your finger when you see
[GAUGE] and [ON / OFF] setting (default is OFF). Press
P
to
choose ON.
