33
• When you stopped for decompression at the indicated depth,
DECO will be off, N
2
indicator will change from blinking to ON,
Current depth blinking will be canceled, and dive will become No
decompression dive.
• If the warning is given even 1 time, it will be recorded in the dive
log.
Decompression Stop Violation
Warning is given when the decompression stop depth is shallower
than the indicated depth. Depth range for stop: -0.5m < indicated
decompression stop depth < + 1m
Blink
Blink
Blink
Locked state
• When current depth is shallower than the indicated depth for
decompression stop, [
↓
DOWN] warning is shown.
• DECO and STOP will blink and alarm will be on for 6 seconds
• When you are back to the right depth for decompression stop,
the warning will be off, otherwise it will keep on.
• If the warning is given even 1 time, it will be recorded in the dive log.
Stop for decompression at the indicated depth. Do not stop at the
shallower depth than it should be. If sea condition would not allow
stopping at the indicated depth, try at 1 – 2 m deeper than the
indicated one and stop for 1-2 minutes longer than indicated time.
If you ascended and stayed in the water shallower than 1.6m
for
10 minutes ignoring decompression stop warning, the risk of
developing decompression illness will be increased. In this case,
the dive computer cannot be used for dive next 48 hours.
• DECO and Current time will all blink indicating the functions are
locked.
