45
3) Display the dive log that you want to check the profile of on the
screen, press
M
.
[ PROF] displays on the screen and after about 1 s the profile
screen displays.
DIVE/GAUGE
Exit time
Entry time
Log No.
YEAR
Month-Day
Water depth
chart
N
2
, O
2
linkage
Warning
Water depth
Elapsed Time
Log Display
Water depth transition display
FO
2
%
* Automatic display of the transition of the depth of water per
minute
* The dive profile that is displayed on the graph is every 7
minutes (20sec.×21).
Elapsed time is the change of the current time while diving.
4) The change in water depth as time elapses during the dive (20
second intervals) is automatically displayed every second, and
stops display at the end of the dive.
For example, above right figure, indicates that 41 min. and 20
s after the dive start, the depth was 8.3 m. In addition, from the
fact that the characters SLO are displayed, you will see that
there was an ascent rate violation.
When you are automatically display the profile, press either the
A
,
L
, or
P
to stop part way through.
After stopping, each time you press
P
, the display time
continues at 20 s intervals from the time that you stopped.
Each time you press L, the display time returns in 1-minute
intervals from the time that you stopped.
* The maximum recording capacity is 30 profiles. If there are
more than 30 profiles, the old profile data is erased, and the
new data will be added.
