23
7. Configuring Current Time and Date Settings
You can use the procedure below to adjust the Time mode time
and date settings if they are off.
City code
M
A
L
P
To Change The Current Time And Date Settings
1. In the Time mode, hold down
A
for at least 2 seconds.First, SET Hold will blink on the
display, and CITY will be displayed in the upper right display. After that, the currently
selected city code and city name will scroll across the upper right display. Keep
A
depressed until the scrolling starts.
2. Press
M
to move the linking in the sequence shown below to select the other settings
Month
Day
Thermometer/
Depth display
unit
Power
Saving
Illumination
Duration
Button
Operation
Tone
DST
Year
Seconds
Hour
Minutes
12/24-Hour
Format
City
Code
Mode
ON/OFF
Dive Mode
Screen
MMDD
DDMM
• The following steps explain how to configure timekeeping settings and surface settings only.
3. When the timekeeping setting you want to change is blinking, use
L
and/or
P
to change it
as described below.
Screen
To do this :
Do this :
Change the city code
Use
P
(East) and
L
(West).
Toggle between Daylight Saving Time (ON)
and Standard Time (OFF).
Press
P
.
Toggle between 12-hour (12H) and 24-hour
(24H) timekeeping.
Press
P
.
Reset the seconds to 00
(If the current seconds count is between 30
and 59, one is added to the minute count).
Press
P
.
Change the hour or minutes
Use
P
(+) and
L
(-)
Change the year, month, or day
4. After all of the settings are the way you want, press
A
to exit the setting screen.
