59
Safety factor you select will be effective until changed.
It will effect calculation on dive and after dive.
Attention
Safety Factor setting
1) Make the mode Plan Mode
Press
P
once in Time mode or Surface Mode.
[PLAN] is shown in the display, and the mode will be changed to
Plan Mode in approx. 1 second.
Ref. Mode types and how to switch them…P.19
2) Press
A
for about 2 seconds
When [GAS1] [21 - 100%] are shown after [SET] [Hold] were
blinked, stop pressing the button.
3) Press
A
2times to make the display for Safety Factor setting.
Blink
4) Every time pressing
P
or
L
, SF is set as below.
SF-0 (default)
→
SF-1
→
SF- 2
5) Press
A
4 times to go back to Plan Mode.
6) Press
M
for about 2 seconds to go back to Time Mode or Surface
Mode.
• Safety factor setting cannot be checked, re-set, changed in
Dive Mode.
• Setting SF-1, SF-2 makes releasing level of M Value Warning
more strict synergistically.
Attention
