22
6. Configuring Home City Settings
There are two Home City settings: actually selecting the Home City
and selecting either standard time or daylight saving time (DST).
City code
DST indicator
M
A
L
P
To configure Home City and Daylight Saving Time Settings
1. In the Time mode, hold down
A
for at least 2 seconds. First, SET Hold will blink on the
display, and CITY will be displayed in the upper right display. After that, the currently
selected city code and city name will scroll across the upper right display.
• The dive computer will exit the setting mode automatically if you do not perform any
operation for about two or three minutes.
• For details about city codes, see the "City Code Table" at the back of this manual.
2. Use
P
(East) and
L
(West) to scroll through the available city codes.
• Keep scrolling until the city code you want to select as your Home City is displayed.
3. Press
M
to display the DST setting screen.
4. Press
P
to toggle the DST setting between Daylight Saving Time (ON) and standard time
(OFF).
• Note that you cannot switch between standard time and daylight saving time (DST) while
UTC is selected as your Home City.
5. After all of the settings are the way you want, press
A
to exit the setting screen.
• Daylight Saving Time is turned on when the DST indicator is on the display.
Note
• After you specify a city code, the dive computer will use UTC * offsets in the World Time
Mode to calculate the current time for other time zones based on the current time in your
Home City.
* Coordinated Universal Time, the world-wide scientific standard of timekeeping.
The reference point for UTC is Greenwich, England.
