99
■
What causes different direction readings to produce
different results at the same location?
→
Magnetism generated by nearby high-tension wires is interfering
with detection of terrestrial magnetism. Move away from the
high-tension wires and try again.
■
Why am I having problems taking direction readings
indoors?
→
A TV, personal computer, speakers, or some other object is
interfering with terrestrial magnetism readings. Move away from
the object causing the interference or take the direction reading
outdoors. Indoor direction readings are particularly difficult
inside ferro-concrete structures. Remember that you will not be
able to take direction readings inside of trains, airplanes, etc.
World Time Mode
■
The time for my World Time City is off in the World Time
Mode.
→
This could be due to incorrect switching between standard time
and daylight saving time. See "To specify standard time or daylight
saving time (DST) for a city" (page 22) for more information.
Charging
■
The dive computer does not resume operation even after
exposed to light.
→
This can happen after the power level drops to Level 5 (page
13).Continue exposing the dive computer to light until the
battery power indicator shows "H" or "M".
■
All (H, M, and L) are blinking on the display.
→
It is in the Power Recovery Mode. Battery power will recover in
about 15 minutes. Exposing the dive computer to bright light
makes recovery sooner.
Ref: Performing multiple sensors during a short period runs
down battery power rapidly, and mode will change to Power
