45
85816
TURFCO
85% AL 85%
85% A 85%
PRESET BUTTON “A” SELECTED AND LOCKED (FACTORY PRESET SHOWN).
“L” IN DISPLAY MEANS IT IS LOCKED AND CANNOT BE MANUALLY CHANGED
WITH SPINNER AND CONVEYOR SPEED SWITCHES.
PRESET BUTTON “A” SELECTED AND UNLOCKED (FACTORY PRESET
SHOWN). SPEEDS CAN NOW BE CHANGED MANUALLY WITH SPINNER AND
CONVEYOR SWITCHES.
A CHANGED UNLOCKED PRESET. PRESET LETTER DISAPPEARS WHEN
SPEEDS ARE MANUALLY CHANGED, NO “L” IN DISPLAY MEANS IT IS STILL
UNLOCKED.
INITIAL STARTUP SCREEN
50% 50%
85% AL 85%
DISPLAYS PRESET BUTTON
SELECTED - “A” “B” OR “C”
NO LETTER WHEN IN MANUAL MODE
DISPLAYS “L” WHEN PRESET SPEED IS
LOCKED,
NO “L” WHEN UNLOCKED
DISPLAYS CONVEYOR BELT SPEED
PERCENTAGE “0%” TO “100%”
DISPLAYS SPINNER SPEED
PERCENTAGE “0%” TO “100%”
50% A 50%
50% AL 50%
PRESET BUTTON “A” HAS BEEN SELECTED AND NEW SPEEDS SAVED TO
PRESET “A”. STILL UNLOCKED, CAN STILL BE MANUALLY CHANGED WITH
SPINNER AND CONVEYOR SPEED SWITCHES.
NEW PRESET SAVED TO BUTTON “A” HAS BEEN SELECTED AND IS NOW
LOCKED “L” IN DISPLAY. CANNOT BE MANUALLY CHANGED WITH SPINNER
AND CONVEYOR SPEED SWITCHES.
FIGURE 33
SV85816-25
ELECTRONIC CONTROL BOX
(See Figure 33)
The electronic control box is the user interface with
the CAN receiver and the top dressers hydraulic
speed controls.
Never attempt to open the electronic control box
case, there are no user serviceable parts inside. If
the control box has failed or was damaged, it will
need replacement.
Verify that the electronic control box cable is plugged
in to the control box and the connector on the front
of the top dresser. Verify that the CAN receiver is
plugged in to the wiring harness (both connectors).
Sample screens are shown below. Refer to the
operators section in this manual for more complete
operating instructions. Refer to the CAN receiver
section for error codes.
L=
PRESET SPEEDS
A
B
C
®
TURFCO
DISPLAY
GREEN
PRESET BUTTONS
YELLOW
LOCKOUT BUTTON
SV85816-31
SERVICE LEVEL MAINTENANCE
