39
Explanation of maintenance survey
Nr. 9 + 14
Oil level hydro tank. The oil level needs to be approximately 2½ cm (1”) under the topside of
the tank.
Specification hydraulic oil viscosity for standard TurfTick:
Viscosity index 151 (heavy duty oil)
Viscosity at 40 degrees:
45,22 cSt (ISO46)
Viscosity at 100 degrees:
8,03 cSt
The Universal Autostacker needs different oil viscosity than a
standard TurfTick!! Contact Turftick Products BV before
replacing hydraulic oil for the Universal Stacker!!
Oil level hydro tank
Nr.13
Oil level PTO hydro pump gearbox needs be filled in all instances up to level indicator (parts
book 101-53-19)
If necessary fill with gearbox oil:
SAE 80W90
Nr15.
Replace bearings lower belt roll turnaround drum:
1.
Free conveyor belt tension (see chapter settings/adjustments conveyor belt)
2.
Dismount caps (parts book 100-59-24) lower belt roll turnaround drum
3.
Take roller out of its frame mount bearings
4.
Place new part in
5.
Mounts caps
6.
Set conveyor belt tension again (see chapter settings/adjustments conveyor belt)
Nr.19.
Guides comb 100-59-08 needs to be replaced when belt openings are more than 6 mm (1/4”)
worn at one side.
In case or emergency, this comb can be turned and function for some extra time.
Nr 20, 21, 22, 24, 27
Summary of Contents for Turf Tick
