27
7.4.3.
Main frame
The main conveyor belt is mounted on the main frame. The main adjustment points are:
-
Adjustment conveyor belt tension
-
Adjustment scrapers upper and lower belt roll
Adjustment tension main conveyor belts
The right tension of the main conveyor belts is important. In the images below the adjusting of
this tension is indicated.
Procedure:
1.
Loosen contra nut (2)
2.
Put fork wrench on the adjustment nut (1) and turn the nut.
3.
Check the tension of the conveyor belts by pulling them up with a force of 10 kg.
Measure the displacement. This needs to be 50 mm. Look at the drawing.
4.
Check that the adjustment on the left and the right side are evenly turned out,
otherwise the conveyor belts are bumping into the left or right side.
5.
Tighten contra nut (2).
1
2
3
Adjustment point tension conveyor belts:
1.
bolt
2.
contra nut
3.
nut
Summary of Contents for Turf Tick
