Turf Tick Products Turf Tick, Original Instructions Manual

Page: 17 / 54

16
The speed of the rotary brush can be adjusted by turning the hydraulic valve (nr. 10). The
rotary brush starts turning faster when the main conveyor belt is speeding up (higher number
of revolutions of the p.t.o.-shaft)
Turning of the hydraulic valve:
- First loosen the lock washer a little bit. This is the lower one of the two rings on the
valve. Before doing this loosen the hexagon socket head cap screws in the lock
washer.
- Turn the hydraulic valve with the upper ring in the desired position.
- Tighten the lock washer and hexagon socket head cap screws.
7.1.7. Auto steer
Before working with the auto steer, it needs to be correctly adjusted (chapter settings and
adjustments). The fine-tuning is possible with the turning button (nr.12). This button lets the
tractor steer a little bit more to the left or the right, allowing keeping no more grass border.
You can put on or off the auto steer system with switch 11. From the moment the auto steer
system is on, you can’t steer manually any more. The auto steer system takes over the steering
of the tractor.
Therefore, the auto steer system can only switched on if you want to start
cutting! If the cutting process stops, the auto steer system has to be switched off with
switch 11.
The auto steer shoe, which is in front of the sod harvester, can be lifted hydraulic (lever 13).
For transportation the auto steer frame can be lifted manually (nr. 14).