Turf Tick Products Turf Tick, Original Instructions Manual, Page: 22 / 54

21
1
A
A Distance between two successive sods
1 Chain drive main conveyor belts
Doing this can check the right adjustment :
- Measure the Distance between two successive sods like it is indicated in the image
(A). Do this by switching off the hydraulic system at the right time (chapter usage)
and bring to standstill the tractor. After doing this you can measure the distance.
- The right distance for a properly adjusted machine needs to be between the 5 and 25
cm.
Adjustment right speed main conveyor belt in relation to the driving speed
If the
speed of the main conveyor belts is too fast (“A” too big) the driving of the tractor
needs to happen in a higher gear .
If the
speed of the main conveyor belts is too low (“A” too little) the driving of the tractor
needs to happen in a lower gear .
Changing of the gear from the tractor
The tractor needs to adapt to the machine, by choosing a gear, to realize the right speed of the
main conveyor belts.
When driving in the right gear, it doesn’t matter anymore how much gas is given: The speed
of the main conveyor belts remains correct.
If you want to drive in a higher or lower gear, the machine needs to be changed by changing
the gear wheel relation from the main conveyor belts.