11
6.
Set-up preparation before starting
6.1.
Basic Machine
The Turf Tick machine is assembled in three main parts.
The trailer
(parts book 101-52). This one is mounted on the 3-point hitch at the back
of the tractor.
The sod harvester
, existing off cutter head, mainframe and rolling up frame. This one
is connected to the trailer and on the bottom side of the tractor with a special mounting
frame.
Mounting frame,
(parts book 100-50). This one needs to be made at size and mounted
at the “belly” of the tractor. The mainframe of the cutting machine is mounted on this.
An employee of Turf Tick Products B.V is making the sod harvester at size in six steps.
These steps are:
1.
Connection of the
trailer
to the three-point hitch of the tractor.
2.
Connection of the
sod harvester
to the
trailer
with a special connecting frame (parts
book 101-52-17 en 101-52-16).
3.
Lengthen the
mounting frame
, such that the
sod harvester
is at the right distance of the
tractor.
4.
Connection of the hydraulic tubes.
5.
Connection of the electric parts.
6.
Adjustment of the sod harvester to your specific needs en circumstances (referred in
chapter “Settings and adjustments
”.
Summary of Contents for Turf Tick
