turck 6814035 Getting Started Manual Download Page 21

Page: 21 / 77

2018/03

Resetting the IP-Address, Switch Position "000"

With this setting the DIP-switches to "000" followed by a voltage reset, the device is set to the
address 192.168.1.254 (see

Default Setting of the Device (Seite 19)

Default Setting of the Device

The device's default-settings are as follows:

IP address

192.168.1.254

Subnet mask

255.255.255.0

Default gateway

192.168.1.1

NOTE

Setting "000" is no operation mode! After having reset the IP address to the default values,
the device has to be set to another mode.

NOTE

The devices can be reset by the user to these default settings at any time.
To reset the module, set the 3 coding-switches on the gateway to "000" followed by a
power-on reset.

ATTENTION!

Protective cover opened
Protection class IP65/IP67/IP69K not guaranteed



Screw the protective cover over the rotary coding-switches firmly



Check if seal of the protective cover is correctly placed

Summary of Contents for 6814035














































































Search results

Summary of Contents for 6814035

Reviews:

Related manuals for 6814035

Brands by name

Popular brands

turck 6814035, Getting Started Manual

Search results

Summary of Contents for 6814035

Reviews:

Related manuals for 6814035

Brands by name

Popular brands