Now we solder 13x10k and 4x22k
R9,10,11,15,12,13,14,16,17,20,23,
24,25, R4,5,6,7
R9,10,11,15,12,13,14,16,17,20,23,
24,25, =10Kohm
-brown,black,black,red,brown
-through hole
R4,5,6,7 =22kohm
-red,red,black,red,brown
-through hole
Than R 22,21,26,18,19,1,2,3,8
R21,R22=2,2 Kohm
-red,red,black,brown,brown
-through hole
R26= 1M ohm
-brown,yellow,black,black,brown
-through hole
R18,19= 220ohm
-red,red,black,black,brown
-through hole
R1,2= 1kohm
-brown,black,black,brown,brown
-through hole
R3,8= 100R
-brown,black,black,black,brown
-through hole
41
Summary of Contents for Jeannie
Page 7: ...Here is the front side of the board again Figure 5 Figure 6 7 ...
Page 8: ...And here is the back Figure 7 Figure 8 8 ...
Page 30: ...Here is the position of the AD converter Here is the position of the AD converter 30 ...
Page 31: ...This picture shows how the pin header of the DAC is soldered to the board 31 ...
