The most important element is of course the Teensy 4.1, which is available from various distributors such as
Reichelt. A heat sink is glued to the Teensy and the USB 5 volt - described below - is changed. The two pin
headers are soldered in from below.
Teensy - 800 MHZ clock
Switching power supply - DC 12 V , 1 A, Plug 5,5 – 2,1 center positiv-
3
Summary of Contents for Jeannie
Page 7: ...Here is the front side of the board again Figure 5 Figure 6 7 ...
Page 8: ...And here is the back Figure 7 Figure 8 8 ...
Page 30: ...Here is the position of the AD converter Here is the position of the AD converter 30 ...
Page 31: ...This picture shows how the pin header of the DAC is soldered to the board 31 ...
