Synthesizers.com Q169 Oscillator++ Manual Download Page 1

Page: 1 / 14

Q169

Osc+

Oct 25, 2021

The Q169 Osc+ module combines

two audio oscillators offering an amazing

array of cross

modulation possibilities, along

with an LFO, envelope generator and sam-

ple

and

hold functions

all gracefully orga-

nized on a triple

wide 5U panel.

Osc+ can be used as a dual oscillator

in a traditional synth patch, as a stand

alone

voice, as a pair of FM operators for additive

synthesis, as independent functions, or as a

complex modulation source.

Go from tame

to chaos with the turn of a knob.

Both audio oscillators are paired with a VC

amplifier, and each can modulate the others

pitch, pulse width and amplitude at the same

time and in variable amounts.

A cross

modulation extravaganza!

The Q169 is the equivalent of 10 modules

and 20 patch cables arranged in a musically

useful and understandable way.

Configura-

tions you probably wouldn't patch naturally

are easily accessible.

Osc+ is com-

plexity dignified.

The optional Q168 Aid module provides

patch points for LFO waveforms, the enve-

lope, noise, S&H and a multi

purpose invert-

able attenuator.

Q169 Osc+ Specifications

Panel Size:

Triple Width 6.375"w x 8.75" (Moog Unit Format)

Input/Output Signals:

10Vpp

Control Voltage Signals:

5V unipolar or 10Vpp bipolar

Gate Signals:

Pitch CV Response:

1V/Octave

Pitch Tracking Range:

10+ Octave

VCA Response:

Linear

LFO Range:

.01hz

20hz

EG Speed:

10s

10ms

Power Requirement:

+15V@150ma,

15V@150ma, +5V@10ma. Synthesizers.com standard.

Summary of Contents for Q169 Oscillator++















Search results

Summary of Contents for Q169 Oscillator++

Reviews:

Related manuals for Q169 Oscillator++

Brands by name

Popular brands

Synthesizers.com Q169 Oscillator++, Manual

Search results

Summary of Contents for Q169 Oscillator++

Reviews:

Related manuals for Q169 Oscillator++

Brands by name

Popular brands