LAN command
MAC?
MAC address read
reply (example) : 0050C2970018
Read only
IPAxxx_xxx_xxx_xxx
IP address set
Set IP address
xxx: 000～255
Activated after power on again or command "RSET"
ＩＰＡ？
IP address read
Read IP address
Reply (example) : IPA192_168_001_155
ＰＲＴx･･･x
Set port number
Set port number
example: PRT7777
Activated after power on again or command "RSET"
ＰＲＴ？
Port number read
Read port number
Reply (example) : PRT 7777
GTWxxx_xxx_xxx_xxx GateWay address set
Set LAN Gate Way address
xxx: 000～255
Activated after power on again or command "RSET"
GTW?
GateWay address read
Read LAN Gate Way address
Reply (example) : GTW192_168_001_001
SNMxxx_xxx_xxx_xxx SubNetMask set
Set LAN Sub Net Mask
xxx: 000～255
Activated after power on again or command "RSET"
SNM？
SubNetMask read
Read LAN Sub Net Mask
Reply (example) : SNM255_255_255_000
Special command (internal ROM initialize command. Please use it by USB communication, when IP address
became unknown, or, when a problem occurred and should be initialized.)
INITROM
Internal ROM data
Initialize internal ROM data
Initialize
Please see the section 4-5-6 for detail of initialize.
Command return "O.K" or "NG", when a command is not required to response
ALL_REP_EN
All reply enabel
Sets a reply for all the commands
Reply "OK" or "NG" from the command
except inquiry command
ALL_REP_DS
All reply disable
No reply from the commands except inquiry command
ALL_REP?
All reply mode request
Ask the status of "all reply enable"
Reply: EN=enable, DS=disable
Command to set 10μs to minimum pulse width of RUN output (TTL)
MIN10U_EN
Minimum 10u enable
Sets 10us to minimum pulse width
MIN10U_DS
Minimum 10u disable
Sets minimum pulse width as a condition
MIN10U?
MIN10U mode request
Ask MIN10U mode
Reply: EN=mode on, DS=mode off
COMMAND
FUNCTION
DETAIL
COMMAND
FUNCTION
DETAIL
COMMAND
FUNCTION
DETAIL
COMMAND
FUNCTION
DETAIL
6/43
