4-2-1. Clear current data address
Type of command
CLGSDN
Clear current data address.
Set data acquisition starting address to zero.
4-2-2. Clear current data address and all stored data
Type of command
CLGSAL
Clear current data address and all memory data.
Set data acquisition start address to zero and clear all memory data.
It takes 30 sec to complete the command.
Please be careful, it is not possible to communicate until the command
finishes.
Current data is overwritten even if it does not clear all the data.
4-2-3. Set and read gate synchronous data acquisition current data address
Type of command
GSDNddd･･･
Set current data address with a decimal value.
ddd･･･ : 0 ～ 9999
Type of command
GSDN?
Read out current data address.
Reply
0 ～ 9999
4-2-4. Set and read gate synchronous data acquisition end data address
Type of command
GSEDddd･･･
Set acquisition end data address.
Data acquisition stop automatically if current data address reach end address.
Type of command
GSED?
Read data acquisition end address.
Reply
０ ～ １４９９９ or ２９９９９
Reply on a decimal value.
4-2-5. Setting of an accumulated data acquisition and an increment data acquisition
It can choose whether to record the data to collect with a raw
counting value (accumulation value), or to collect increment data.
When Power-up, the accumulation value is chosen.
Type of command
GT_ACQ_DIF
Increment data are collected.
It is the difference data which subtracted the last counter value from
the present counter value.
Type of command
GT_ACQ_FUL
Accumulation values are collected. When power-up, this mode is chosen.
The value of the read counter becomes a data as it is.
Type of command
GT_ACQ?
The data to collect asks a raw counting value or increment.
Reply
FUL: A raw counting value
DIF: Increment counting value
26/43
