PREMIUM22P
2014-10-08
32
DISMANTLING TO CONTROL THE COUNTER-BLADE
Imperatively remove the ignition key for this type of servicing
-Remove the two attachment bolts diam.12
(
1
)
as well as the two safety bolts
(
2
)
diam.8 at
each end of the counter-knife.
-Drive it out by sliding it in its housing on either side. If the edge is worn out; completely
remove the counter-knife from its housing, and remount it by shifting it a quarter turn so as
to show a new edge facing the knives.
(Each of the counter-blade’s four edges can be used)
-Reinsert the two bolts
(
1
)
and
(
2
)
.
M A I N T E N A N C E
Summary of Contents for GS/PREMIUM22P
