TSindustrie GS/PREMIUM22P, Technical Manual

Page: 46 / 56

PREMIUM22P
2014-10-08
46
In this section, we have drawn up a list of problems, their causes, and the solutions to bring
if eventually you came across one.
The case may arise where you will have to face a problem that is not mentioned in the
troubleshooting section, if so please get in touch with your dealer. Make sure you have your
user manual as well as your shredder’s serial number.
PROBLEM CAUSE SOLUTION
The engine does not start Coupler security engaged
- Security emergency circuit-
breaker triggered
-The hood’s safety pick-off is
defective
-The battery is discharged
-The power supply cables are
damaged
-Defective (diesel) engine
stopping
-Fuse blown in the
distribution box
-See pages 44 and 45
- Release it
-Check it (see p.38)
-Charge or replace the
battery
-Check the electric circuits
-Check the solenoid valve
- Replace the fuse
The engine starts and stops
4 seconds later -Only for Premium DRI:
cracked fuse (mark 11), p.50
-Check and replace lamp 17
(p.50) if broken
Engine power reduction -Gas-oil or petrol filter
clogged
-Knives and hammers blunted -Replace the filter
-Sharpen or replace the
knives. Change the
hammers’ pellets
P R O B L E M - S O L V I N G
INTERVENTION BY A TECHNICIAN ON THE ELECTRICAL CIRCUIT:
Since 2008 all TE Industrie chippers offer the possibility to shunt rotation controller
M18 of the rotor. The technician can then investigate an electrical fault on the
machine without starting the engine (see p. 44). The shunt will stop automatically
when the contact is broken.
Check the TS Industrie technical customer service in your area or the TS Industrie
after sales department. They will explain how to shunt controller M18.