Did you find what you’re looking for? The Truth Hardware Web site is a great resource
for the latest product and installation information. It’s available at www.truth.com
2
Danger: To help prevent severe personal injury or death:
•
Read and understand instructions completely before beginning
installation.
•
Wiring must be installed by a qualified electrician according to
local and National Electrical Codes (N.E.C.)
•
Disconnect main power before beginning installation! Verify
that power is OFF at the main breaker or fuse panel by testing
with a voltage meter that you know is working correctly.
•
Connect power only after motor connections and settings are
verified.
•
This equipment does not provide a method to shut off power,
and should be connected to a dedicated breaker or fused
power circuit capable of providing 1 amp at 120 VAC of power
per skylight unit.
•
The screen interlock MUST be correctly installed and is a
required part of the power skylight system. It is intended to
help prevent injury that could result from reaching into the
skylight area during operation. The correct installation of the
screen interlock is the responsibility of the installer. (The
screen interlock is not required on skylights installed more
than 8 feet above the floor.)
•
Do not allow children to operate the wall switch push buttons
or remote control transmitter(s).
Additional Safety Guidelines
•
When connecting the Sentry II system to accessories, read the
installation instructions supplied with each accessory before
beginning installation.
•
The Sentry II system is intended for indoor use only, with
screens in place.
•
This product has been designed to open and close skylights
and awning windows only. Any other use of this product is not
supported by Truth Hardware.
•
Save ALL instructions. Additional copies can be downloaded
off of our web site at: truth.com\technicalsupport
•
Installer – please be sure to give ALL instructions to the
homeowner once installation is complete.
