Did you find what you’re looking for? The Truth Hardware Web site is a great resource
for the latest product and installation information. It’s available at www.truth.com
11
6. Install Screen Interlock!
DANGER: The screen interlock must be correctly installed on all skylights
less than 8 feet (2.4 meters) above the floor. It is intended to prevent
personal injury and/or skylight damage during operation. The correct
installation of the screen interlock is the responsibility of the installer.
Screen interlock installation:
•
Install screen interlock to the screen frame as shown below using #6-
32 X 3/8” Phillips PH, Self Threading, Machine Screw.
•
Refer to wiring diagram on page 28 for wire connections.
•
Remove the jumper installed in the Grey terminals on terminal block
“10”. Connect screen interlock leads to the same terminals. If this is
a Follower motor leave jumper in place and only connect interlock to
the Leader.
Note: Wire orientation or polarity does not matter for this connection.
Screen Interlock
#6-32 X 3/8” Phillips PH,
Self Threading, Machine Screw
