Did you find what you’re looking for? The Truth Hardware Web site is a great resource
for the latest product and installation information. It’s available at www.truth.com
21
Control unit setup for Power Blind installation
•
Locate DIP switch block on the control unit labeled “S2”. (See main
wiring diagram on page 7.) Set DIP switch #4 to the “on” position.
(Important: Do not change any other switch positions!)
S2
S2
S2
S2
1
2
3
4
5
6
on
off
•
Consult blind installation instructions for proper blind motor polarity.
Locate the positive wire to open the motorized blind. Connect it to the
“Grey” terminal on terminal block #12. (See main wiring diagram.)
Note:
•
If unable to determine the positive wire to open the motorized blind,
the blind motor can be connected in either orientation. However, if
the blinds open in the opposite direction from the button pressed,
the two wires will need to be reversed.
•
When the blinds are used in combination with the HPI “Open”
function, the blinds will open automatically before the skylight is
opened. This is because this feature is often used for smoke
evacuation when connected to a smoke alarm.
The following companies can provide information on blinds or shades that are
compatible with the Sentry II Motor System. Be sure to ask for
the
“
Motivator
”
series made by Verosol. Try these Verosol distributors:
OEM Shades Inc.
Shades Unlimited
700 First Ave.
545 Brooklyn Road
Ford City PA 16226
Mount Tabor VT 05739
724-763-3600
802-293-2478
www.oemshades.com
www.skylightshades.com
