16
VIII. Radio Operation, continued
Normal Transmit and Receive
The MURS-25 is pre-programmed with the five (5)
Multi User Radio Service frequencies.
Select the channel that you wish to operate on, making
sure that all other radios you wish to communicate with
are on the same channel and CTCSS or DCS tone setting.
Refer to "Channel Frequency Selection" and "CTCSS /
DCS Tone Signaling" information in this manual for
more information.
Press the monitor button to check the channel for
activity. To avoid interrupting another use, make sure
the channel is clear before you begin transmitting.
To transmit, place the radio microphone approximately
2 (5 cm) from your mouth. Press and hold the P-T-T
bar while speaking in a normal tone. Release the P-T-T
bar when you are finished speaking; the radio will be
placed into receive mode.
When the battery pack voltage becomes too low for
operation to continue, the LED will blink red and a
tone will sound. The radio will allow only one more
transmission - change or charge your battery. Refer to
the "Low Battery Warning" section of this manual.
Summary of Contents for MURS-25
Page 1: ...MURS 25 Operating Instructions ...
Page 2: ......
