VII. Getting Started, continued
Charging the NiMH Battery Pack, continued
NOTE:
The first few uses from the battery will not
be at normal capacity. After repeating the charge /
discharge cycle two or three times, the battery
capacity will increase to provide full capacity.
1. Plug the AC adapter cable in the adapter jack
located on the rear of the charger, then into
an AC outlet.
2. Slide the NiMH battery pack (or the radio
equipped with a NiMH battery pack) into the
charging slot.
3. Ensure that the metal contacts on the battery pack
come in contact with the charging terminals.
4. When charging the NiMH battery pack alone,
insert the provided plastic spacer (stored in
charger base) into the charging well, then insert
the battery pack.
5. The charger LED will light to advise that charging
has begun. Charge the standard battery pack for
9 hours. REMOVE THE PACK OR RADIO
FROM THE CHARGER.
IMPORTANT NOTE: The charger DOES NOT
TURN OFF AUTOMATICALLY after the charging
cycle has been completed.
Damage to the battery
or reduced battery life may result if charged in
excess of the recommended charging time.
11
Summary of Contents for MURS-25
Page 1: ...MURS 25 Operating Instructions ...
Page 2: ......
