TRUST 920 POWERC@M ZOOM
4
Inserting/removing the batteries
Follow the instructions given below to insert or remove the batteries
U K
Note:
Make sure the camera is turned off.
1.
Open the battery cover on the bottom of the camera by sliding it in the
direction indicated by the arrow and folding it open.
2.
Insert the batteries into the battery compartment as indicated on the inside of
the battery cover (see figure 5).
3. Close
the
battery
cover.
The camera is now ready for use.
The battery indicator will be displayed at the bottom of the LCD screen when the
camera is turned on.
Batteries full.
Batteries half full.
Batteries almost empty.
Batteries empty. Replace the
batteries.
Table 1: Battery status on the LCD screen
Note:
The batteries should be removed if the camera is not going to be used
for some time. This will save the battery power.
Note:
It is normal for the camera casing to become warm when using the
camera.
Note:
After inserting/replacing the batteries, you will have to reset the date
and the time (see chapter 10).
5
Explanation of the camera functions
Functions on the front of the camera (see figure 1).
Point
Description
Function
1
Wrist strap fixing point
Eye for fixing the wrist strap to the camera.
2
Flash
The built-in flash provides more light for the
subject to be photographed.
3 Automatic
exposure
indicator
Flashes when the automatic exposure
function is used.
4
Viewfinder
The viewfinder is used to determine the size
and the position of the photograph. The
actual photograph is recorded by the lens
and not by the viewfinder. The image may
differ when the digital zoom is used.
5
Lens
Records the image to be taken.
6
Focus - Normal
For photographs at a distance of 320 cm to
infinity.
7
Focus - Portrait
For photographs at a distance between 80
cm and 320 cm.
3
